Prototype of a Fish Feed Control Monitoring System Based on Web and Raspberry Pi
Main Article Content
Abstract
The hobby is an activity that is usually done by humans, keeping fish in an aquarium, for example. However, busyness or activities that have become routine often become obstacles when distributing these hobbies. For example, when someone has to travel far but still has to maintain his hobby of keeping fish to condition his pets and provide appropriate feed. Therefore, this research makes a prototype tool that can make it easier for hobbyists by monitoring fish and feeding them directly. This study uses several stages of research, including the analysis stage, the design stage, the implementation stage, and the testing stage. The results of this study are monitoring of fish conditions can be seen directly via the web by streaming. The results of testing the control of fish feeding are where the feed reservoir volume is 100 grams optimally when adjusting the feed opening and closing using a servo motor setting shifted 10 degrees and open for 4 seconds to produce feed—weighing 4 grams that fell into the aquarium
Downloads
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with Positif : Jurnal Sistem dan Teknologi Informasi agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
M. Ikbal, B. A. Prakosa, and A. H. Hendrawan, “Sistem Notifikasi Fish Feeder Automation Berbasis Hypertext Preprocessor ( Php ) Berbantuan Arduino Uno R3.” pp. 474–484,.
A. P. Lubis and E. Rahayu, “Sistem Monitoring Jarak Jauh Pada Suhu Kolam Ikan Nila Bangkok Memanfaatkan Internet Of Things (IOT) Berbasis NodeMCU ESP8266,” vol. 1, no. 1. pp. 1–8,.
E. Rohadi, “Sistem Monitoring Budidaya Ikan Lele Berbasis Internet Of Things Menggunakan Raspberry Pi,” J. Teknol. Inf. dan Ilmu Komput, vol. 5, no. 6, p. 745, doi: 10.25126/jtiik.2018561135.
R. Kurniawan, “Rancang Bangun Media Center Menggunakan Osmc (Open Source Media Center) Berbasis Raspberry Pi Di Perumahan Griya Pasar Ikan Ii Kota Lubuklinggau,” J. Teknol. Inf. Mura, vol. 8, no. 1, pp. 8–16, [Online]. Available: http://jurnal-stmik.muralinggau.ac.id/index.php/jti/article/view/182.
H. E. Putra, M. Jamil, and S. Lutfi, “Smart Akuarium Berbasis Iot Menggunakan Raspberry Pi 3,” JIKO (Jurnal Inform. dan Komput., vol. 2, no. 2, pp. 60–66, doi: 10.33387/jiko.v2i2.1179.
H. Himawan and M. Y. F, “Pengembangan Alat Pemberi Makan Ikan Otomatis Menggunakan Arduino Terintegrasi Berbasis Iot,” Telematika, vol. 15, no. 2, p. 87, doi: 10.31315/telematika.v15i2.3122.
D. Arman, Lewi, and A. K. Muhammad, “Rancang Bangun Sistem Penebar Pakan Dan Pengatur Level Air Serta Sistem Informasi Pada Tambak Ikan Lahan Pasang,” Semin. Nas. Penelit. Pengabdi. Kpd. Masy, vol. 2019, pp. 112–117,.