PERBANDINGAN RAB DINDING KONVENSIONAL DENGAN SANDWICH PANEL EPS PADA RUMAH TIPE 45
DOI:
https://doi.org/10.31961/gradasi.v10i1.14984Keywords:
Dinding Konvensional, Dinding Precast, Rencana Anggaran BiayaAbstract
Mengingat di Banjarmasin kondisi tanahnya berupa tanah rawa/lunak sering terjadi rumah roboh atau miring sebagai akibat kurang kuatnya pondasi menahan beban bangunan. Maka untuk menopang beban struktur bangunan diperlukan material yang berbahan ringan, kuat, murah dan mudah pemasangannya. Struktur dinding merupakan salah satu yang dominan pada beban bangunan rumah. Tujuan penelitian adalah membandingkan Rencana Anggaran Biaya pada pembangunan rumah tipe 45 menggunakan dinding konvensional bata ringan dengan dinding precast sandwich panel EPS (Expanded Polystyrene System). Rencana Anggaran Biaya pada masing – masing pekerjaan dinding dihitung berdasarkan data denah rumah tipe 45, rancangan dindingnya, analisa harga satuan pekerjaan tahun 2022, harga satuan bahan dan upah kota Banjarmasin tahun 2022, untuk mengetahui perbandingan biaya mana yang lebih efisien. Berdasarkan perhitungan Rencana Anggran Biaya pada pekerjaan dinding konvensional rumah tipe 45 diperoleh sebesar Rp 97.835.785, sedangkan pada pekerjaan dinding precast sebesar Rp 169.871.500 dengan selisih Rp 72.035.715 atau 73,63 % lebih murah pekerjaan dinding konvensional.
Downloads
References
Adiasa, A. M., dkk. (2015). Evaluasi Penggunaan Beton Precast di Proyek Konstruksi. Jurnal Karya Teknik Sipil, 4(1), 126–134. http://ejournal-s1.undip.ac.id/index.php/jkts.
Ajayi, Tajudeen Olawale., dkk. (2024). Cost Management Evolution in Building Projects: A Review of Innovations and Challenges. Department of Architectural Technology, 9(9), 80-95. https://doi.org/10.51584/IJRIAS.2024.909009.
Anugerahanto, K., dan Adistana, G. A. Y. P. (2018). Perbandingan Pelaksanaan Pekerjaan Dinding Precast dan Dinding Konvensional pada Konstruksi High Rise Building Ditinjau dari Segi Waktu dan Biaya. 1–9.
Asuat, F. R., dkk. (2018). Analisa Perbandingan Biaya Material Pasangan Bata Merah, Bata Ringan dan Batako paCahyani, R. F., dkk. (2022). Perbandingan RAB Rumah Rangka da Proyek Pembangunan Museum MPU Purwa Malang. 1 (September), 1–6.
Bhandari, Piyush. (2016). Evaluating Properties of Lightweight Sandwich Wall Panels. International Journal for Scientific Research & Development, 4(6), 175-178.
Bida, Sani Mohammed., dkk. (2018). Advances in Precast Concrete Sandwich Panels toward Energy Efficient Structural Buildings. Preprints. doi:10.20944/preprints201810.0147.v1.
Cahyani, R. F., dkk. (2022). Perbandingan RAB Rumah Rangka Baja Ringan dengan Rangka Beton Tipe 45 Di Banjarmasin. Jurnal Gradasi Teknik Sipil, 6(1), 64–73. https://doi.org/10.31961/gradasi.v6i1.1237.
Dabhade, U. D., dkk. (2009). Time and Cost Evaluation of Construction of Steel Framed Composite Floor with Precast Concrete Floor Structure. 26th International Symposium on Automation and Robotics in Construction, 139–148. http://www.irbnet.de/daten/iconda/CIB14831.pdf.
Dhake, Madhulee S.., dan Borse, Nirmal. (2022). Experimental Study On Eps Sandwich Panel & Cost Analysis"- Light House Project. International Journal of Creative Research Thought, 10(8), 590-595. https://ijcrt.org/papers/IJCRT2208431.pdf.
Einea, A., dkk. (1994). A New Structurally and Thermally Efficient Precast Sandwich Panel System. PCI Journal, 39(4), 90-101. https://doi.org/10.15554/pcij.07011994.90.101.
Goritman, B., dkk. (2012). Studi Kasus Perbandingan Berbagai Bata Ringan dari Segi Material, Biaya, dan Produktivitas. Pratama Teknik Sipil, Clc, 1–8. http://studentjournal.petra.ac.id/index.php/teknik-sipil/article/view/389.
Husein, Nahro Radi., dkk. (2013). An Experimental Study on Using Lightweight Web Sandwich Panel as a Floor and a Wall. International Journal of Innovative Technology and Exploring Engineering, 3(7), 69-75. DOI:10.13140/RG.2.2.30087.65449
Holla, B. Raghavendra K., dkk. (2016). Time, Cost, Productivity and Quality analysis of Precast Concrete System. International Journal of Innovative Science, Engineering & Technology, 3(5), 252-257. https://ijiset.com/vol3/v3s5/IJISET_V3_I5_34.pdf.
Juansyah, Y., dkk. (2017). Analisis Perbandingan Rencana Anggaran Biaya Bangunan Menggunakan Metode Sni Dan Bow (Studi Kasus: Rencana Anggaran Biaya Bangunan Gedung Kwarda Pramuka Lampung ). Jurnal Rekayasa, Teknologi, Dan Sains, 1(1), 1–5. http://ejurnalmalahayati.ac.id/index.php/teknologi/article/view/1-5.
Kiptum, Clement Kiprotich., dkk. (2020). Cost and Waste Evaluation of Expanded Polystyrene (EPS) Model House in Kenya. International Journal of Engineering Research & Technology, 9(07), 1594-1596. https://www.researchgate.net/publication/343479342_Cost_and_Waste_Evaluation_of_Expanded_Polystyrene_EPS_Model_House_in_Kenya.
Lalu, Mulyadi., dkk. (2016). Comparative Analysis of Time and Cost in the Work Installation of Walls outside the Building Using Red Brick Walls and Light Brick Walls in the City of Kaltim Post Tenggarong. International Journal of Scientific Engineering and Science, 4(1), 16-19. https://ijses.com/wp-content/uploads/2020/01/139-IJSES-V3N12.pdf
Lenggogeni, dkk . (2016). Penggunaan Dinding Panel EPS dan Dinding Bata Ringan pada Rumah Sederhana Dilihat dari Segi Biaya. 798.
Moutassem, Fayez., dan Alamara, Kadhim. (2021). Design And Production Of Sustainable Lightweightconcrete Precast Sandwich Panels For Non-Loadbearing Partition Walls. Cogent Engineering, 8(1), 1–15. https://doi.org/10.1080/23311916.2021.199356
Pawar, M. T. S. S. J., dan dkk. (2022). Budgeting and Cost Control in a Construction Project Management. International Journal of Scientific Research & Engineering Trends, 8(4), 1867-1872.
Prapto, P., dan Haryadi, B. (2017). Studi Perbandingan Biaya Per 1 M2 Pekerjaan Pasangan Dinding Bata Ringan Dengan Pasangan Bata Merah. Studi Perbandingan Biaya Per 1 M2 Pekerjaan Pasangan Dinding Bata Ringan Dengan Pasangan Bata Merah, 13(1), 103–119. https://doi.org/10.21831/inersia.v13i1.14596.
Pratama, S., dkk. (2017). Analisis Perbandingan Koefisien Harga Satuan Pekerjaan Berdasarkan Kondisi Aktual, SNI, AHSP, Dan Analisa K (Studi Kasus: Proyek Pembangunan Drainase Saluran Limbah TPA Terjun Marelan Medan). Jurnal Teknik SIpil USU, 6. https://garuda.kemdikbud.go.id/documents/detail/1437941.
Putra, S. P., dan Pontan, D. (2020b). Analisis Perbandingan Biaya dan Waktu Pelaksanaan antara Dinding Cast In Situ dan Dinding Pracetak (Studi Kasus: Citra Plaza Nagoya, Batam). Prosiding Seminar Intelektual Muda 4, September, 359–364.
Rori, G., dkk. (2020). Analisis Perbandingan Biaya Material Pekerjaan Pasangan Dinding Bata Merah dengan Bata Ringan. Jurnal Sipil Statik, 8(3), 311–318.
Sakhimol, B., dan Kalpana, V.G.. (2021). Structural and Thermal Efficiency of Composite Precast Sandwich Panels: A State-Of-The-Art. International Journal of Engineering Trends and Technology, 69 (9), 179-192. doi:10.14445/22315381/IJETT-V69I9P222
Sanoob, Sahir., dan dkk. (2020). Cost Comparative Study of Conventional and Cost-Effective Construction Materials. International Journal of Innovative Research in Science, Engineering and Technology, 9(6), 1111–1115.
Shirke, Ankita., dkk. (2022). Comparison Between Eps Construction And Brick Construction. International Research Journal of Modernization in Engineering Technology and Science, 4(4), 2356–2359.
Sulaeman, F. S., dan Permana, I. H. (2021). Sistem Monitoring Penerapan Rencana Anggaran Biaya Berbasis Web. Jurnal IKRA-ITH Teknologi, 5(1), 24–31.
Syawaldi, N., dan Siswanto, E. H. (2016). Rencana Anggaran Biaya (RAB). 4(1), 1–23.
Tjitradi, D., dkk. (2020). Pemodelan Kerusakan Bangunan Akibat Penurunan Pondasi Di Lahan Basah Kota Banjarmasin. Jurnal Kacapuri: Jurnal Keilmuan Teknik Sipil, 3(2), 16. https://doi.org/10.31602/jk.v3i2.4064.
Wahyuningtyas, M. (2021). Analisis Perbandingan Biaya Bata Ringan dan Batu Bata pada Pekerjaan Pembangunan Gedung Lembaga Penjamin Mutu Pendidikan Tahap II Sulsel.
Wangidjaja, W. (2023). Analysis of the effectiveness of using EPS sandwich panel versus lightweight bricks at residential project: Case study at residential houses in Jakarta. IOP Conf. Series: Earth and Environmental Science, 1-10. doi:10.1088/1755-1315/1324/1/012034.
Wibowo, A., dkk. (2016). Perilaku Geser Pada Dinding Panel Jaring Kawat Baja Tiga Dimensi dengan Variasi Rasio Tinggi Dan Lebar (Hw/Lw) Terhadap Beban Lateral Statik. Rekayasa Sipil, 10(2), 99–105.
Yuntafa, E., dkk. (2010). Perbandingan Pekerjaan Pasangan Dinding Bata Ringan Dengan Pasangan Dinding Panel Precast Ditinjau dari Segi Biaya dan Waktu (Studi Kasus pada Proyek Green Place Apartment, Kalibata Jakarta Selatan). 1, 7–17.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Nur Endah Widyawati, Aunur Rafik, Rinova Firman Cahyani, Ningtyas Rahmawati, Destaf Ubaidillah Fitri
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors who publish in Jurnal Gradasi Teknik Sipil agree to the following terms:
- Publication rights for all journal manuscript materials published/published in this Jurnal Gradasi Teknik Sipil are held by the Editorial Board with the knowledge of the author (copyright remains with the author).
- The formal legal provisions for accessing digital articles in this electronic journal are subject to the terms of the Creative Commons Attribution-NonCommercial-ShareAlike (CC BY-NC-SA) license, which means that the Jurnal Gradasi Teknik Sipil has the right to store, transfer media/format, manage in the form of a database, maintain, and publish articles without asking permission from the Author as long as the Author's name is included as the Copyright owner.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work .
- Printed and electronically issued/published manuscripts are open access for education, research and library purposes. Apart from these purposes, the editorial board is not responsible for violations of copyright laws
