Sistem Smart Gate Dengan Menggunakan Wastafel Dan Sensor Suhu Touchless Sensor Berbasis Fuzyy Logic Control
DOI:
https://doi.org/10.31961/positif.v8i1.1262Keywords:
Smart Gate, Sensor, Functional testing, Standard Health Protocol, Automation, Fuzzy Logic ControlAbstract
Health protocol standards are the main standards during the Covid-19 period. Because there is still a lack of public awareness in carrying out the protocol, one of which is that many people do not wash their hands before doing activities or even check body temperature sensors. In offices, whether private or government, tourist attractions, education and other health protocols still use employees, especially to check body temperature and lack of discipline in terms of checking users, so that people stay tipped, it is necessary the development of standard automation technology that must be carried out when the public will enter the office area or students before entering the school area through the gate. In order for the gate to be open, it must go through two standard health protocols, namely hand washing and checking body temperature. If one is not done and the value is not in accordance with the Covid task force standards, the gate will still be closed, for the hand washing process and temperature sensors use This touchless sensor is to reduce the level of risk of direct contact so that it will reduce the level of spread of the covid-19 virus. The results of this study from 50 respondents who tested the smart gate the success rate reached 90% percent success with 2 input parameters, namely through hand washing and body temperature sensors where the data was processed using fuzzy logic control. The method used for testing is using the functional tools/sensors used. While 10% is not successful because of the external light intensity factor when reading the sensor.
Downloads
References
Ahmad Amir.A,( 2016). Waterbath Menggunakan Valve Berbasis Mikrokontroler Atmega 16. Universitas Muhammadiyah Yogyakarta
Ahmad.S.R dan Devie.R.A (2017) “Sistem Pengendali Pintu Pagar Secara Otomatis Menggunakan Mikrokontroller” Fakultas Teknik, Universitas Trunojoyo Madura.
Akhmadi, K. (2014). Rancang Bangun Sistem Kontrol Perangkat Listrik Kamar Kos Berbasis Arduino Mega 2560 Menggunakan Password. Purwokerto : Sekolah Tinggi Teknik Telematika.
Ashifa Shan Stevania. (2019) Alat Pengukur Dan Pencatat Suhu Tubuh Manusia Berbasis Arduino Mega 2560 Dengan Sms Gateway.UNNES.
Astrid, Setiani. 2015. Rancang Bangun Power Supply Untuk Mesin Electrical Discharge Machining (EDM). Semarang. Universitas Negeri Semarang
Djuandi, F. (2011). Pengenalan Arduino. Jakarta: tobuku.com.
Eddy Friyanto. (2016). Perancangan Pengukur Detak Jantung Dan Suhu Tubuh Berbasis Arduino Serta Smartphone Android. Surakarta. Teknik Elektro, Fakultas Teknik, Universitas Muhammadiyah Surakarta.
Fernando, E. (2017). Pengendalian Pneumatik Pada Robot Pembersih Kaca Gedung Bertingkat Otomatis. Padang, Indonesia: Politeknik Negeri Padang.
Gusti A.D, Meilia.S. (2017). Non-Contact Thermometer Berbasis Infra Merah. Teknik Elektromedik Universitas Muhammadiyah YogyakartaIndonesia.
Faisal Wahab (2017). Desain dan Purwarupa Fuzzy Logic Control untuk Pengendalian Suhu Ruangan, JTERA - Jurnal Teknologi Rekayasa
Hendriono, Dede. (2014),”Mengenal Arduino Uno”, Elektronika Arduino.
Heri Andrianto, Pemrograman Mikrokontroler AVR ATMega 16 Menggunakan Bahasa C (Code Vision AVR), (Bandung: Informatika, 2013), h. 89
Kadir A. 2013. Panduan Praktis Mempelajari Aplikasi Mikrokontroler Dan Pemrogramannya Menggunakan Arduino. Yogyakarta
Utami, D. P. (2015). Kotak Sampah Mobile Menggunakan Perintah Suara dengan Laporan Melalui Short Message Service (Software). Palembang, Indonesia: Politeknik Negeri Sriwijaya
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Sunu Jatmika, Tria Aprilianto, Dimas Burhanudin

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with Positif : Jurnal Sistem dan Teknologi Informasi agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
This work is licensed under a Creative Commons Attribution 4.0 International License.