Smart Gate Program System Based On Temperature Indicators And Automatic Wasins
DOI:
https://doi.org/10.31961/positif.v7i2.1238Keywords:
Non-Contact Temperature Sensor gy906/mlx 90614, Ultrasonic Sensor, Health Protocol, Automatic Gate, Covid 19Abstract
This study discusses the system to overcome the current problems, namely the lack of discipline in washing hands and checking body temperature before entering the building which is one of the important things in implementing health protocols during the covid-19 pandemic. Both of these things are still often violated and are things that are often underestimated by visitors and the lack of firmness by officers in responding to these violations. In this study, a tool is designed to be used to check temperature and wash hands automatically which later will be an indicator to open a gate or automatic portal as a path or entrance to a building/building which is expected to be able to help officers work to be more disciplined. visitors who do not apply the health protocols that have been determined and are also able to minimize direct physical contact that will be caused by the current conventional system so as to minimize the risk of transmission of covid19. This tool uses a temperature sensor gy906/mlx 90614 as a non-contact temperature sensor and uses ultrasonic as a temperature sensor. Object distance detection, and also uses a dc motor actuator as a driver to open or close the gate. In the testing of the tools that have been carried out, the results obtained that the automatic gate system is able to run well by being controlled by both indicators, namely the temperature sensor and automatic sink as the main input in the whole system.
Downloads
References
Darmayanti, ""Aplikasi Sensor Fotodioda pada Smart"," Politeknik Negri Sriwijaya, 2019. [Online]. Available: http://eprints.polsri.ac.id/7884/.
A. Zakaria , "Rancang Bangun Smart Gate Pada Perpustakaan ITS Menggunakan Smart Card ITS (ITS Smart)," 2020. [Online]. Available: https://repository.its.ac.id/79396/.
Y. Mukhammad and A. . S. Hyperastuty, "SENSITIVITAS SENSOR MLX90614 SEBAGAI ALAT PENGUKUR SUHU TUBUH TUBUH NON-CONTACT PADA MANUSIA," IJPN (Indonesian Journal Of Professional Nursing ), vol. 2, no. 2, pp. 51-53, 2020.
I. P. L. Dharma, S. Tansa and I. Z. Nasibu, "Perancangan Alat Pengendali Pintu Air Sawah Otomatis dengan SIM800l Berbasis Mikrokontroler Arduino Uno," Jurnal Teknik Universitas Negri Gorontalo, vol. 17, no. 1, pp. 40-56, 2019.
D. Setiawan, "PENGERTIANC++ DANFUNGSI-FUNGSINYA," ILMUTI (ilmu teknologi informasi), 2017.
S. R. Sokku and S. F. Harun, "Deteksi Sapi Sehat Berdasarkan Suhu Tubuh Berbasis Sensor MLX90614 dan Mikrokontroller," SEMNAS Universitas Negri Makasar, pp. 613-617, 2019.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Mufidatul Islamiyah, Samsul Arifin, Rofiul Anam
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with Positif : Jurnal Sistem dan Teknologi Informasi agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
This work is licensed under a Creative Commons Attribution 4.0 International License.