Perencanaan Campuran Lapis Aspal Beton Permukaan Dengan Asbuton Butir Sebagai Filler

Authors

  • Surat Surat Politeknik Negeri Banjarmasin
  • Rifanie Gazalie Politeknik Negeri Banjarmasin
  • Pazilatul Mumamiroh Politeknik Negeri Banjarmasin

DOI:

https://doi.org/10.31961/gradasi.v2i1.574

Keywords:

asbuton, Asphalt Concrete Wearing Course, Asphalt Mixture Properties

Abstract

The objective of this research was to use mineral in asbuton as filler and asphalt will be taken into account to reduce the use of oil asphalt in Asphalt Concrete Wearing Course. The material used in this research was aggregate crushed stone from Katunun Mountain, Tanah Laut Regency, South Kalimantan, asphalt Pen 60/70 production of Pertamina and Asbuton grade 15/20. Use of Asbuton 7% in Asphalt Concrete Wearing Course mixture with optimum asphalt content   of 5.25% mixed properties of  VIM 3.5%, VMA 15.7%, VFB 77,9%, Stability 1484 kg,         Flow 3.3 mm, VIM PRD 3.0%, Stability  remaining 90.8% obtained. At the optimum asphalt content of 5.25%, mixed experiments with Asbuton grains were varied, 5.0%, 9.0%, 11.0% and 13.0%. The Marshall test showed that the greater the addition of Asbuton, the higher the stability value, the sequential stability value of 1058 kg, 1449 kg, 1509 kg and 1600 kg. Flow range from 3.1 mm to 3.5 mm. The VIM 3.5% up to 5.6%, VMA 15.75% up to 16.87%, VFB 68.1% up to 71.9%. The experimental results with Marshall testing of the asphalt mixture qualities meet the Asphalt Concrete Wearing Course criteria.

Downloads

Download data is not yet available.

References

Departemen Pekerjaan Umum. 1999. Pedoman Penggunaan Aspal Karet dalam Campuran Beraspal Secara Panas, PT. Mediatama Saptakarya , Jakarta.
Departemen Pekerjaan Umum. 1999. Pedoman Perencanaan Campuran Beraspal Panas dengan Kepadatan Mutlak, PT. Mediatama Saptakarya , Jakarta.
Departemen Pekerjaan Umum. 1991. SNI-06-2432-1991 Metode Pengujian Daktilitas Bahan-Bahan Aspal, Pustran.Balit .Bang, Bandung.
Departemen Pekerjaan Umum. 1991. SNI-06-2433-1991 Metode Pengujian Titik Nyala dan Titik Bakar Dengan Alat Cleveland Open Cup, Pustran.Balit.Bang, Bandung.
Departemen Pekerjaan Umum. 1991. SNI-06-2441-1991 Metode Pengujian Berat Jenis Aspal Padat, Pustran.Balit .Bang, Bandung.
Departemen Pekerjaan Umum. 1991. SNI-06-2456-1991 Metode Pengujian Penetrasi Bahan-bahan Bitumen, Pustran.Balit.Bang , Bandung.
Departemen Pekerjaan Umum. 1991. SNI-06-2434-1991 Metode Pengujian Titik Lembek Aspal Dengan Alat Cincin dan Bola (Ring and Boll), Pustran.Balit.Bang , Bandung.
Departemen Pekerjaan Umum. 1990. RSNI-M-01-2003 Metode Pengujian Campuran Beraspal Dengan Alat Marshall, Pustran.Balit.Bang, Bandung.
Departemen Pekerjaan Umum. 1990. SNI-03-1968-1990 Metode Pengujian Tentang Analisa Saringan Agregat Halus dan Kasar, Pustran.Balit.Bang, Bandung.
Departemen Pekerjaan Umum. 1990. SNI-03-1969-1990 Metode Pengujian Berat Jenis dan Penyerapan Air Agregat Kasar, Pustran.Balit.Bang, Bandung.
Departemen Pekerjaan Umum. 1990. SNI-03-1970-1990 Metode Pengujian Berat Jenis dan Penyerapan Air Agregat Halus, Pustran.Balit.Bang, Bandung.
Departemen Pekerjaan Umum. 1991. SNI-03-2417-1991 Metode Pengujian Keausan Agregat dengan Mesin Abrasi Los Angeles, Pustran.Balit.Bang, Bandung.
Departemen Pekerjaan Umum. 1991. SNI-03-2439-1991 Metode Pengujian Kelekatan AgregatTerhadap Aspal, Pustran.Balit.Bang, Bandung.
Departemen Perkerjaan Umum. 1987. SKBI.2.3.26, UDC: 625.73(02) Petunjuk Perencanaan Tebal Perkerasan Lentur dengan Metode Analisa Komponen. Jakarta.
Departemen Pemukiman dan Prasarana Wilayah. 2002. PtT-01-2002-B Pedoman Perencanaan Tebal Perkerasan Lentur. Jakarta.
Direktorat Jenderal Bina Marga, Departemen Pekerjaan Umum. 2010. Spesikasi Umum, Jakarta.
Direktorat Jenderal Prasarana Wilayah, Dep.Kim.Pras.Wil. 2002. Manual Pekerjaan Campuran Beraspal Panas, Jakarta.
Direktorat Jenderal Bina Marga, PUSLITBANG Jalan dan Jembatan, 2007, Modul Pendampingan Teknis Asbuton untuk Pemeliharan dan Pembangunan Jalan, Jakarta
Direktorat Jenderal Bina Marga, Departemen Pekerjaan Umum, APBN TA 2007,Spesifikasi Khusus, Jakarta.
Departemen Pekerjaan Umum. 1999. Pedoman Perencanaan Campuran Beraspal Panas dengan Kepadatan Mutlak, PT. Mediatama Saptakarya , Jakarta.
Departemen Pekerjaan Umum. 1991. SNI-06-2432-1991 Metode Pengujian Daktilitas Bahan-Bahan Aspal, Pustran.Balit .Bang, Bandung.

Downloads

Published

2018-07-23

Issue

Vol. 2 No. 1 (2018): Jurnal Gradasi Teknik Sipil - Juni 2018

Section

Articles

License

Authors who publish in Jurnal Gradasi Teknik Sipil agree to the following terms:

  1. Publication rights for all journal manuscript materials published/published in this Jurnal Gradasi Teknik Sipil are held by the Editorial Board with the knowledge of the author (copyright remains with the author).
  2. The formal legal provisions for accessing digital articles in this electronic journal are subject to the terms of the Creative Commons Attribution-NonCommercial-ShareAlike (CC BY-NC-SA) license, which means that the Jurnal Gradasi Teknik Sipil has the right to store, transfer media/format, manage in the form of a database, maintain, and publish articles without asking permission from the Author as long as the Author's name is included as the Copyright owner.
  3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work .
  5. Printed and electronically issued/published manuscripts are open access for education, research and library purposes. Apart from these purposes, the editorial board is not responsible for violations of copyright laws