Penggunaan Heat Pipe Persegi dan Sirip Untuk Meningkatkan Performance Pada Flat Plate Solar Collector

Authors

  • Rabiatul Adawiyah Politeknik Negeri Banjarmasin
  • M. Khafidz Arifin Politeknik Negeri Banjarmasin

DOI:

https://doi.org/10.31961/porosteknik.v8i2.372

Keywords:

Flat Plate Solar Sollector, Performance Heat Square Pipe, fins, Efficiency

Abstract

Based on the review of references from journals, and review of the literature supporting
this research, state of art the underlying issue of solar collectors in particular types of flat
plate solar collector how to improve performance such as efficiency the collector can be
increased maximum. In improving this performance history researchers perform a variety of
ways, that is modification, add fixtures, test material used etc. From the results of research
related to the problem of the increase in performance use of hosepipes connected with the
use of heat pipe absorber all round. This raises a hypothesis in which the surface directly
exposed to hot sun or in contact with the absorber a little part of the arch so that the surface
area too small conduction, if used pipes square shape is expected to occur heat absorption
is better because of surface conduction wider and coupled with a fin heat sink.
Based on the above, the underlying issue is the increase in performance generated in
the form of heating efficiency, is to examine how they affect the use of heat pipe square and
added a fin on the top to the increased performance of the solar collector.
The results of this study found that the performance of solar collector that uses square
pipe equipped with fins better than solar collector with a round pipe

Downloads

Download data is not yet available.

Downloads

How to Cite

Adawiyah, R., & Arifin, M. K. (2017). Penggunaan Heat Pipe Persegi dan Sirip Untuk Meningkatkan Performance Pada Flat Plate Solar Collector. POROS TEKNIK, 8(2), 79–85. https://doi.org/10.31961/porosteknik.v8i2.372

Issue

Section

Artikel (Indonesia)