RANCANG BANGUN SISTEM MONITORING DAN KONTROL INFUS DENGAN PENERAPAN INTERNET of THINGS (IoT) BERBASIS ANDROID
DOI:
https://doi.org/10.31961/positif.v5i2.740Abstract
Infusion is considered a vital device for health which in certain condition, it serves for substituting liquid loss and balancing the body’s electrolyte. Therefore, a system for monitoring and controlling the condition of infusion from far areas in the real time is required. Building such system needs some sensor components among others photodiode for monitoring the droplets of infusion, load cell for monitoring the weight of infusion bottle, RGB sensor TCS34725 for monitoring the clogging of blood, and Wi-Fi module esp8266 for applying the concept of Internet of Things in the system. The results of testing this control system got the accuracy by 80% and the manual accuracy was 70%. Thus, the accuracy difference between manual and system was 87.5%. Meanwhile, the success level of data delivery in this monitoring system was 90%. In conclusion, the value showing the difference of accuracy levels indicated that the control system could stabilize infusion droplets. Moreover, the success of data delivery demonstrated that the sensor of monitoring system implementing Internet of Things could run well.
Downloads
References
Adisti, A. R., & Heriyanto, H. (2012). Hubungan Pemanfaatan Teknologi Wi-fi Dengan Tingkat Kunjungan Pemustaka Di Upt Perpustakaan Politeknik Negeri Semarang. Jurnal Ilmu Perpustakaan, 1(1), 60-66.
Anggraini, S. D. (2014). Program Perancangan Kotak Sampah Otomatis Menggunakan Sensor PIR dan LDR Berbasis Radio Kontrol. Politeknik Negeri Sriwijaya Palembang.
Bishop, O. (2004). Dasar-dasar elektronika. Jakarta: Erlangga..
Developers, Android. (2014). Android Developers. [Online]. Tersedia : http://developer.android.com/index.html. Diakses pada tanggal 27 Februari 2019.
Electro, Scematics. (2015). ESP8266 DataSheet https://www.electroschematics.com/11276/esp8266-datasheet/, diakses 18 April 2018.
Geier, J. (2015). Wireless Networks First-Step. Yogyakarta: ANDI.
Gautama, I. W. W., & Gautama, I. W. W. (2015). Sistem Informasi Geografis Pemetaan Wisata Pantai Bali Selatan Berbasis Android (Doctoral dissertation, Universitas Udayana).
HURISANTRI, W. (2016). SISTEM PENDETEKSI WARNA DAN NOMINAL UANG UNTUK PENYANDANG TUNA NETRA BERBASIS ARDUINO UNO (Doctoral dissertation, POLITEKNIK NEGERI SRIWIJAYA).
Ida, W. (2010). Pengaruh Area Hotspot (Wi-Fi) Bagi Pemenuhan Kebutuhan Informasi Pemustaka Di Kantor Perpustakaan Daerah Kabupaten Jepara (Doctoral dissertation, Faculty of Humanities).
Iwan, S. (2008). Membangun Jaringan Komputer: Mudah membuat Jaringan Komputer (Wire & Wireless) untuk Pengguna Windows dan Linux.
Muhammad, M. A. (2016). RANCANG BANGUN SELF SERVICE PEMINJAMAN DAN PENGEMBALIAN BUKU DI PERPUSTAKAAN JURUSAN TEKNIK KOMPUTER POLITEKNIK NEGERI SRIWIJAYA (Doctoral dissertation, Politeknik Negeri Sriwijaya).
Mulyanta, E. S. (2005). Pengenalan Protokol Jaringan Wireless Komputer. Penerbit Andi.
Nagantara, J. (2010). Sistem Kerja PID pada Rangkaian Penggerak Servo Untuk Motor DC. Jakarta : Unversitas Bina Nusantara.
Onno, P. W. (2006). Buku Pegangan Internet Wireless dan Hotspot. Jakarta: Elex Media Komputindo.
Prihadi, G. (2015). Rancang Bangun Perangkat Pengendali Debit Tetesan Infus Otomatis Untuk Proses Terapi Infus. Yogyakarta : Teknik Informatika Universitas Islam Indonesia.
Priyambodo, T. K., & Heriadi, D. (2005). Jaringan Wi-Fi Teori dan Implementasi. Jakarta: Andi.
Rakhmad, F. A. (2015). Makalah internet of things http://amalliafr.blog.st3telkom.ac.id/2015/12/16/makalah-internet-of-things-2/ diakses 10 April 2019.
Rama, G. M. & Kak, A. C. (2013). Software – Practice and Experience. New Jersey: Wiley Online Library.
Supriyono, J., & Pramadya, A. (2011). Pembuatan Aplikasi Mobile Berbasis Android Os untuk Mengetahui Lokasi Tempat Wisata di Daerah Istimewa Yogyakarta. Jurusan Teknik Informatika Sekolah Tinggi Manajemen Informatika dan Komputer Amikom Yogyakarta.
Utama, R. M., & Syasepta, R. (2013). ALAT UKUR TINGGI DAN BERAT BADAN DIGITAL BERBASIS MIKROKONTROLLER.
Wicaksono, S. (2017). Aplikasi Kran Otomatis Berbasis Arduino (Doctoral dissertation, STMIK AKAKOM YOGYAKARTA).
Wahyuni, S. (2015). Rancang Bangun Perangkat Lunak Pada Semi Otomatis Alat Tenun Selendang Songket Palembang Berbasis Mikrokontroler ATMEGA 128 (Doctoral dissertation, Politeknik Negeri Sriwijaya).
Rahmawati, V., & Efendi, A. T. (2017). Sistem Pengendali Pintu Berbasis Web Menggunakan NodeMcu 8266 (Doctoral dissertation, STMIK AKAKOM Yogyakarta).
Zhang, Y., Zhang, S., Ji, Y., & Wu, G. (2010). Intravenous infusion monitoring system based on WSN.
Yuda Handaya. 2010. Infus Cairan Intravena (Macam-Macam Cairan Infus). http://dokteryudabedah.com/infus-cairanintravena-macam-macam-cairan-infus/, diakses tanggal 16 April 2018.
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with Positif : Jurnal Sistem dan Teknologi Informasi agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
This work is licensed under a Creative Commons Attribution 4.0 International License.